Joint Lifting Beam, a multifunctional design

The challenge was to design and deliver a smart modular joint lifting beam which accommodates the over-boarding and installation of different types of (subsea) cable joints with bend restrictors.

Multifunctional Design

Due to different lengths and bended shapes of various joints, the lifting beam needed to be designed in such a way that all possible load cases, rigging configurations, over-boarding and installation operations of our client could be covered. Furthermore the beam needed to have smart accessories and functionalities facilitating subsea remote ROV operations.

Besides design challenges, the project schedule was also very challenging for the delivery of a tested and certified beam within 8 weeks.

DNVGL standards

First of all, Eager.one has designed the beam with detailed calculations and drawings according to DNV GL standards. After review and approval by DNV GL the beam has been fabricated under survey of DNV GL. Directly after finishing the fabrication the beam has been load-tested extensively for all load cases under witnessing of DNV GL. Following the load-tests the beam has been coated with an offshore paint system. Finally hydraulics and wooden fenders are attached and the beam is tested for functionality.

Within a very challenging schedule Eager.one has delivered a turn-key project to a satisfied client.

Learn more about the Joint Lifting Beam

For more information on lifting- and handling tools or specific questions about this tool do not hesitate to contact us.

Joint Lifting Beam (over-boarding beam) is a multifunctional beam designed for over-boarding and subsea installation of different types of offshore cable joints with bend restrictors.

We are eager to hear from you

Call +31 (0) 30 240 80 60 or use the contact form. We always respond within 24 hours.

  • By submitting this form you agree with the privacy policy of Eager.one.
  • Dit veld is bedoeld voor validatiedoeleinden en moet niet worden gewijzigd.

You are not alone