Pile Gripper Frame for monopile foundations installation

Eager.one supplied a Pile Gripper Frame with a capacity of 1400t, that was designed to install monopile foundations for the Veja Mate OWF project. Subsequently, the pile gripper was installed on the offshore wind installation vessel Seajacks Scylla.

The double stage gripper is equipped with a system to compensate motions during lowering through the splash zone.

Engineering, fabrication and installation on the vessel were all part of the scope of work of Eager.one.

Take a look at the video below to see the pile gripper being installed on the vessel.

 

Another video was recorded on board of the Seajacks Scylla. It shows a time-lapse of the installation of the monopile foundations with the new pile gripper.

 

Contact us for more information and let us support your project with Eager.one mission equipment.

The Pile Gripper Frame is a double stage gripper to install monopile foundations, with a capacity of 1400t. The monopiles are installed from an offshore wind installation vessel.

We are eager to hear from you

Call +31 (0) 30 240 80 60 or use the contact form. We always respond within 24 hours.

  • By submitting this form you agree with the privacy policy of Eager.one.
  • Dit veld is bedoeld voor validatiedoeleinden en moet niet worden gewijzigd.

You are not alone